|
SPRING SCHEDULE
OSHA RECORDKEEPING
COMPLIANCE
January 12
8:00 AM -
Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: January 6
Members: $95
Non-Members: $124
OSHA
Standard 1904: Recordkeeping and Reporting Occupational Injuries and
Illnesses is intended to assist companies in tracking and reporting
incidents so they are less likely to occur again in the future. The
National Safety Council’s Recordkeeping Compliance course will help you
learn to better understand Standard 1904 and how it affects your
facility. Instructor: Todd Sieleman
FALL PROTECTION
January 20
(change of date)
8:00 AM -
Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: January 13
Members: $95
Non-Members: $124
This
4-hour course will give participants the information needed to train
employees in basic fall protection from heights. Topics covered include
fall protection principles, components of arrest systems, equipment
limitations, and review of OSHA standards for both 1910 General Industry
and 1926 Construction. Participants will further learn training tips and
techniques meant to help employees understand and apply learned concepts
for fall protection. Instructor: Todd Sieleman
ELECTRICAL SAFETY FOR
MAINTENANCE WORKERS
January 23
8:00 AM -
Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: January 18
Members: $95
Non-Members: $124
Workers
face many hazards on the job. Improperly grounded electrical circuits
can result in injuries, fires, equipment damage, and could very likely
result in an OSHA inspection and costly fines. Poorly designed haphazard
modifications to electrical systems may jeopardize the delivery of goods
or services and ruin your business. Case studies along with examples of
equipment and procedures designed to help workers understand the basics
of electrical safety will be included in this 4-hour safety course.
Instructor: Pat O'Connor
COACHING THE LIFT TRUCK
OPERATOR
January 27
8:00 AM -
Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: January 20
March 17
8:00 AM -
Noon
Northwest
Tech School, 1515 Munn, Maryville
Registration Deadline: March 13
April 4
8:00 AM -
Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: March 31
Members:
$75
Non-Members: $99
This
four-hour program is designed to meet OSHA training requirements
(Standard 1910.178) for operators of powered industrial trucks,
classroom requirements only. It includes a review of regulatory OSHA
standards, safe vehicle operation, maintenance and protection of
personnel, operators and property as well as a segment on pedestrian
safety. Upon completion of this class, employers are encouraged to
complete the on-site, hands on portion of the training at their
respective facilities.
Instructor: Sheldon Lyon
OSHA 10-HOUR GENERAL
INDUSTRY
February 7
& 8
8:00 AM -
4:00 PM & 8:00 AM - Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: February 1
April 24 &
25
8:00 AM -
4:00 PM & 8:00 AM - Noon
Northwest
Tech School, 1515 South Munn, Maryville
Registration Deadline: April 17
Members: $195
Non-Members: $254
This
two-day course is designed to provide participants with basic
information on how to comply with OSHA general industry standards.
Participants will understand employer/employee rights and
responsibilities under the Occupational Safety and Health Act, learn how
OSHA inspections are conducted, identify OSHA expectations for your
safety and health programs, identify key provisions of the ten most
often cited standards, and get up-to-date on the latest changes to OSHA
standards. Instructor: Sheldon Lyon
OSHA 10-HOUR CONSTRUCTION
February 16
& 17
8:00 AM -
4:00 PM & 8:00 AM - Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: February 10
Members: $195
Non-Members: $254
This
course is designed for construction workers, foremen and job
supervisors. The training program provides workers general awareness on
recognizing and preventing hazards on a construction site and covers a
variety of construction safety and health hazards. Workers must
receive additional training on hazards specific to their jobs, such as
fall protection, scaffolding, etc. Training emphasizes hazard
identification, avoidance, control and prevention. Instructor: Todd
Sieleman
CONFINED SPACE ENTRY
February 28
8:00 AM - 4:00 PM
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: February 24
March 29
8:00 AM -
4:00 PM
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: March 24
April 20
8:00 AM -
4:00 PM
Northwest
Tech School, 1515 South Munn, Maryville
Registration Deadline: April 13
Members: $195
Non-Members: $254
This program is designed to familiarize employees with
the hazards and complexities of confined space operations. Employees
will gain an understanding of the OSHA standards for confined space
operations and how it applies to your company. Topics covered include,
but are not limited to:
· Entry
requirements,
· Air
monitoring,
· Lockout/Tagout,
· Completing
permits.
Program is designed for entrants, attendants and
supervisors of confined spaces. Instructor: Environmental
Training Services
LOCKOUT/TAGOUT
March 7
8:00 AM - Noon
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: March 1
Members: $95
Non-Members: $124
This
workshop is designed to help participants better understand the
requirements and importance of OSHA Standard 1910.147. This training
program reviews the purpose for using proper lockout/tagout procedures
by helping identify dangers associated with energized equipment, when
and how to lockout/tagout equipment, required employee training,
start-up and operating procedures. Instructor: Todd Sieleman
HAZMAT/HAZWOPER
8-HOUR REFRESHER
May 5
8 AM - 4 PM
St. Joseph
Safety Council, 3131 Frederick Ave., Suite 220, St. Joseph
Registration Deadline: April 28
Members:
$195 Non-Members: $254
The
HAZMAT 8-hour Refresher course is meant for HAZMAT/HAZWOPER personnel
who have previously completed a 24- or 40-hour course and are required
to have eight hours of annual refresher training. This program
meets the needs of employees that must be updated on HAZMAT information
and skills covering topics such as: laws and regulations, health
hazards, references, operations, personal protection equipment, and
decontamination. Instructor: Environmental Training Services
ON-SITE TRAINING
Upon request, the Council can provide on-site training,
including
lift truck operator
training, 2-hour lift truck refresher
and
2 1/2 hour defensive driver training.
These
courses can be tailored to fit your company’s needs. We
can also take the stress out of
scheduling trainers on a variety of topics at your
facility. Give us a call to find out more.
CANCELLATION POLICY
Cancellations for any class must be made
at least three business days prior to the course; substitutions will be
accepted. Those registered but not attending will be billed at the full
cost of the course; late cancellations will be billed at half the cost
of the course.
|
